Busch Twin Cut Cup Burr Set No 411T Fraizers 12 Pieces 0.8 - 2.0mm - TFS411T

Description

Busch Twin Cut Cup Burr Set Fig 411T
High quality steel cup burrs by Busch from 0.8mm - 2.0mm (12 burrs).
This twincut concave burr from Busch measures 0.90mm in diameter and is the ultimate tool for chaton work. The three-in-one precision tool enables you to safely round off, shorten and smooth prongs in one easy step. Designed with twincut blade geometry, the concave burr removes material quickly and precisely, with two chip channels for the rapid discharge of removed material. The cup walls of the burr are also much thinner, making it easy to work on tightly spaced prongs. Made from tungsten vanadium steel, this precision quality Busch burr has a total length of 0.70mm and a standard 3/32 inch shank, with a recommended speed of 2500 - 7000rpm.
Don't forget we also sell Burr Life Lubricant (SKU code TG47).
Suitable for quick release handpieces and micromotors. All our Busch pendant motor burrs have a 2.34mm shank to accommodate most handpieces.
Used by jewellers and dentists worldwide.
We are an official UK distributor.
There is no substitute for quality
.
When the brothers Ernst and Otto Busch set up their dental bur factory Busch & Co. in Düsseldorf in 1905, they could hardly have imagined that these words would describe its output just 100 years later!
Their intention was to give a boost to dentistry, a field which was still in its infancy at the time (there were just 500 dentists in the whole of Germany in 1905), by producing better instruments. They and the two following BUSCH generations succeeded admirably in this respect, as the entire history of the company, which moved to Engelskirchen in 1908, is characterized by constant adjustment to the latest developments in science and technology.
https://stores.ebay.co.uk/hswalsh/ - Visit our UK eBay store here.
This twincut concave burr from Busch measures 0.90mm in diameter and is the ultimate tool for chaton work. The three-in-one precision tool enables you to safely round off, shorten and smooth prongs in one easy step. Designed with twincut blade geometry, the concave burr removes material quickly and precisely, with two chip channels for the rapid discharge of removed material. The cup walls of the burr are also much thinner, making it easy to work on tightly spaced prongs. Made from tungsten vanadium steel, this precision quality Busch burr has a total length of 0.70mm and a standard 3/32 inch shank, with a recommended speed of 2500 - 7000rpm. Their intention was to give a boost to dentistry, a field which was still in its infancy at the time (there were just 500 dentists in the whole of Ge