Disc Cutter Round Magnum Set 14 Pieces SFC Tools - 28-550

Description

This 14 piece Magnum disc cutter set features:
14 punches
Punch design allows the punch to completely clear the die
Punches have 7-degree cutting angles
Punch measurements are engraved in MM and IN onto the disc cutter
Metal hold-down feature
Height adjusting knob, easy open and close
14 nylon center positioning dies
6 inch Urethane Pad
Wood storage box
The measurements are laser engraved onto the disc cutter in both MM & IN.  Inches: 1/8", 3/16, 1/4", 5/16", 3/8", 7/16", 1/2", 9/16, 5/8", 11/16, 3/4", 13/16, 7/8" & 1". Metric: 3mm, 4.75mm, 6.35mm, 8mm, 9.5mm, 11mm, 12.7mm, 14.3mm, 16mm, 17mm, 19mm, 20.6mm, 22mm & 25mm.
The Magnum Disc Cutter set is designed for many years of reliable use. The hardened steel set is precision machined. The punches are designed to completely clear the die on a cut. The punches themselves have a 7-degree cutting angle.  This creates a sheering action that reduces the cutting stresses and produces much cleaner cutouts. The metal hold down feature restricts any movement of your metal, by firmly holding it in place. The adjusting height knob is simple to open & close. It is designed not to get in the way when you are using the cutter. The wooden storage box will keep everything together and dust free. The center positioning dies help create perfectly concentric washers. To use you simply punch a hole in your metal with a die the size of your desired inner ring diameter. Then move your metal to the larger punch size and use the appropriate centering plug to perfectly center the metal and punch a hole with METAL die the size of your desired outside ring size. The Urethane pad is for use under the disk cutter to help absorb the blow from the hammer and protect the ends of the punches when they go through.
We recommend using our brass mallet 1lb. or   2lb.  or a dead blow hammer to prevent damage to your disc cutter.
IMPORTANT: Always position a shim of the same thickness of the metal being cut directly across from the metal in the disc cutter block. This keeps the plates balanced and helps ensure a nice clean cut.
If you have any questions please feel free to contact us.
Please visit our store for other great jewelry and watch tools such as; Torches, Hand Tools, Crucibles, Stamps, Tongs, Borax and Much Much More!
And Always, Thank You for Looking!