E6000 Jewelry & Bead 1oz w/ 4 Tips Clear Adhesive Permanent Glue Rhinestone

Description

E6000
®
Jewelry & Bead™ Glue
ALLOWS SMALL ADHESIVE DROPS FOR FINE, PRECISE, CONTROLLED AND NO-MESS APPLICATIONS.
Precision tips make this perfect for securing knots and
permanently
attaching most any type of stone, gem, crystal or bead to jewelry finds and base metal, silver, copper and gold jewelry pieces.
Precision applications are now simple for many other non-craft projects too!
Features and Benefits:
Precision tips included for precise applications
Industrial strength formula
Multi-surface — Polymer Clay, Metals, Wood, Resin Jewelry, Leather and much more!
Clear
Maximum flexibility
Waterproof
A high-performance industrial adhesive that
became a hit in the craft market with its
superior performance, flexibility and versatility.
Typical Use:
E-6000® outperforms silicones, acrylics and rubber cements because it adheres to more surfaces with greater durability. E-6000® provides a superior bond on stubborn porous and non-porous substrates like metal, plastic, glass, concrete, rubber, as well as brick, tile, marble, ceramic, vinyl, fabric, canvas, leather and wood.
Just follow these step-by-step directions when using E-6000®:
Please read all directions
before using.
E-6000
should be used in a well-ventilated area.
Surface should be clean, dry, and free from dirt.
For best results, roughen surface before use. Best when used between 70 \u00b0F (21 \u00b0C) and 85 \u00b0F (29 \u00b0C).
Always test a small area
to ensure proper application technique and dry time.
Amazing E-6000 directly to each surface to be bonded or repaired.
Allow
E-6000
to partially cure, 5-10 minutes, before bringing surfaces together.
E-6000
hardens by solvent evaporation and forms an immediate bond that is difficult to reposition after both adhesive-coated surfaces are placed in contact with each other and sufficient pressure is exerted to establish full contact.
For maximum strength, allow to dry for 48 hours.
Cure time increases with lower temperatures and decreases with higher temperatures.
Keep threads at the neck of the tube free of E-6000 residue.
To ensure easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
Clean uncured adhesive
with small amounts of acetone or naphtha; the adhesive will ball up and brush off. Cured material may be removed by cutting or scraping.
Store unused Amazing E-6000 at room temperature with cap tightened.
NOTE:
E-6000 may damage finished surfaces. Avoid such contact until E-6000 is completely dry.
Information:
Industrial-strength single component adhesive.
Bonds to glass, wood, plastics, tin, metal, ceramic, cement, rubber, vinyl, leather, fabric and many more.
Dries clear.
Photograph safe.
Safe for repeated washing and drying.
Paintable
Withstands heat up to 150 F / 66 C.
Uses:
Decorate glass bottles with plastic, metal and wood.
Affix beads to vases.
Assemble silk or plastic floral arrangements.
Decorate wood frames with fabric.
Create unique jewelry with metal findings.
Assemble wooden birdhouses.
Repair wooden or ceramic planters.
And much more!
FAQS
What types of jewelry and beads will E6000 Jewelry & Bead work on?
Jewelry & Bead will permanently attach most any type of stone, gem, crystal or bead to findings and base metal, silver, copper and gold jewelry pieces. It also permanently bonds objects to polymer clay, metals, wood, resin jewelry, leather, and much more.
What temperature range does E6000 Jewelry & Bead withstand?
Product can be used between 50 and 90 °F (10 - 32 °C). Dry time decreases when used between 70 and 90 °F (21 - 32 °C).
Will E6000® Jewelry & Bead crack or break under stress?
No, Jewelry & Bead dries to a rubber-like consistency that is flexible and won't crack or break under stress.
How long does E6000 Jewelry & Bead take to cure?
Jewelry & Bead starts getting tacky in approximately 2 minutes and begins setting in approximately 10 minutes. A full cure takes between 24 and 72 hours.
Remember, temperature and humidity will affect cure time.
What is used to clean up uncured E6000 Jewelry & Bead?
Small amounts of acetone or citrus-based solvents for uncured Jewelry & Bead.