Sega Dreamcast PicoPSU - Dreamcast Replacement Power Supply PSU DreamPSU

Description

This is a complete kit to replace the power supply in your Dreamcast. The original power supply will run hot if you have a GDEMU so this is a great solution to keep your console cool. It is also a great substitute if your old power supply is going out or just getting too old.
This power supply plugs directly into the slot for the old PSU and even secures with one of the original screws. The rear plug slots directly into the back of your dreamcast in place of the original plug. No soldering or any modifications required just unplug the old PSU and plug this directly in.
The power plug is now printed on a resin printer so it is a perfect print with no layer lines whatsoever. When installed the plug will look like it was made to be that way from the factory and you can't tell it is even 3d printed.
You will need a 12V DC plug adapter for this with a 5.5x2.5mm plug. Many old laptop cables are compatible. If you need the cable as well it is included with the PicoPSU in this listing here:
https://www.ebay.com/itm/284422821580